With air conditioner demand surging, scientists are looking for ways to improve the energy efficiency of cooling systems and limit damaging emissions that accelerate global warming.
Improve efficiency
Innovation is focused on three major fronts, with much of the attention on energy consumption. Air conditioning units account for six percent of electricity used in the United States.
Several breakthroughs have already cut power consumption by half since 1990, according to the U.S. Department of Energy.
The most impactful was the so-called "inverter" technology, which makes it possible to modulate the motor's speed instead of running it at 100 percent continuously.
Other new features include demand controlled ventilation (DCV), which relies on sensors to determine the number of people in the building and adjust airflows.
Different refrigerants
Another major area is the search for substitutes to the refrigerant gases used in most of the nearly two billion installed AC units, according to the International Energy Agency.
For decades, air conditioners almost exclusively ran on chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) gases, which are thought to be up to 10,000 times as bad as CO2 in terms of global warming impact.
CFC and HCFC were banned under the Montreal Protocol, from 1987.
Then came hydrofluorocarbons (HFCs), which are now scheduled to be phased out by 2050.
Factories and commercial buildings already use other gases, such as ammonia -- which has no greenhouse gas impact -- as well as hydrocarbons, mainly propane, whose emissions are lower than methane.
"In some countries, you're starting to see hydrocarbon refrigerants," mostly propane, "being used, but there are restrictions around how much quantity you can put into the system" because such gas is flammable, said Ankit Kalanki, manager at the Rocky Mountain Institute.
Mandatory safety features make for a "level of sophistication" with "a price premium that gets added to the units itself," he added.
"And the residential air conditioning market tends to go towards the lowest first cost products, then the highest efficiency products."
Some are trying to go gasless, like Pascal Technology, a Cambridge, Massachusetts startup, that's working on a mechanism to keep refrigerants in a solid state, avoiding any discharge.
A new generation
Other innovation is focused on products that bypass compression, an energy-intensive process in air conditioning that has changed little since its invention in 1902.
Separate groups of scientists at the National University of Singapore (NUS) and the Wyss Institute at Harvard University, respectively have built air conditioners that use water to cool the air.
The Wyss Institute has already made prototypes based on its cSNAP model, that operates on a quarter of the electricity used in the traditional compression process.
The device is partly built with ceramic panels, made in Spain.
The startup Blue Frontier, which counts Bill Gates as an investor, uses a salt solution that captures the humidity of the air, then cools it through contact with water.
The solution also makes it possible to store energy, "so you're not having to deal with capacity limits of the infrastructure," said Daniel Betts, Blue Frontier's CEO.
The Florida-based startup plans to rent its AC units to commercial building owners for a subscription fee, recouping its investment from electricity savings.
Usually, acknowledges Betts, "building owners don't see the value, except for marketing, of having higher efficiency equipment."
"We eliminate the burden of financing high efficiency equipment, because we're doing it as a subscription service."
Air conditioning innovation has been slower to address the third major issue related to conventional units, the discharge of hot air outside buildings.
One of the few available options are geothermal heat pumps, which employ a grid of buried pipes that channel cooler temperatures from underground, and do not release warm air.
© 2023 AFP
7 Comments
Login to comment
BigP
As for Japan, you don’t need to be a scientist to know how to close a door.
gaijintraveller
In Japan surely better insulation is a better solution.
Why are Japanese home better insulated? So many Japanese think this is because the summer is hotter and a better insulated house will be too hot, but this is so wrong. The point of insulation is not to keep only heat in, it is to maintain a temperature difference. If you don't understand this, think of a vacuum flask, which can be used for storing hot or cold drinks or a coolbox, which can also keep food warm.
wallace
We need energy-efficient homes that use only 20% of the current levels.
David Brent
How about “let’s build a house with proper insulation”?
Might finally be a thing in Japan by the year 3000.
Desert Tortoise
Insulation only goes so far. Our house has extra thick walls and the most up to date insulation but when temps are 45 centigrade day after day you still need some air conditioning to be comfortable.
theFu
Insulation and HVAC efficiency matter.
Efficiency of HVAC equipment has improved silently by about 30% in the last 15 yrs, at least in the USA. In 2000, required SEAR was 10. In 2006, required SEAR was 13. In 2015, required SEAR was split into different requirements by region. In "the south", it is now SEAR 14.
There are also insulation standards for all new construction. Insulation becomes less efficient over time as it becomes more dense due to gravity (I guess), so it is common to add more insulation over the existing levels.
Last Xmas, I had some pipes burst which took out about 25% of the insulation for the house along with a small wall. Heating bills doubled for a few months. Fortunately, new walls, insulation and a ceiling were completed before summer. The finishing work is almost completed now, just a few minor things remain. 8.5 months to get things fixed. I'm not certain that the new insulation is any better than the old stuff, but the cooling costs have been less this summer. The A/C for upstairs was new in 2009, SEAR 13. Wish I would have gotten a little higher efficiency. It is noticeably cheaper to run that A/C than the downstairs SEAR 10 one.
I suppose SEAR is a US-only rating?
theFu
Little things like sealing the cracks around doors, windows and into the unfinished parts of a house can make a big different. Spend a few weekends replacing caulk inside and outside. For larger gaps, use some expansion foam.